Variadores frecuencia, arrancadores

ARRANCADOR SUAVE ALTISTART-22 ATS22 17A

Marca:

356,00 € (impuestos inc.)

SIN IVA: 294,21 €

En Stock

Referencia:

ATS22D17Q

Descripción
Opiniones de clientes

Descripción

range of product	Altistart 22
product or component type	Soft starter
product destination	Asynchronous motors
product specific application	Pumps and fans
component name	ATS22
network number of phases	3 phases
[Us] rated supply voltage	230...440 V - 15...10 %
motor power kW	7.5 kW 400 V 4 kW 230 V 7.5 kW 440 V
factory setting current	14.8 A
power dissipation in W	39 W for standard applications
utilisation category	AC-53A
type of start	Start with torque control (current limited to 3.5 In)
IcL starter rating	17 A connection in the motor supply line for standard applications
IP degree of protection	IP20

assembly style	With heat sink
function available	Internal bypass
supply voltage limits	195...484 V
supply frequency	50...60 Hz - 10...10 %
network frequency	45...66 Hz
device connection	In the motor supply line To the motor delta terminals
[Uc] control circuit voltage	230 V -15...10 % 50/60 Hz
control circuit consumption	20 W
discrete output number	2
discrete output type	Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
minimum switching current	100 mA 12 V DC relay outputs
maximum switching current	5 A 250 V AC resistive 1 relay outputs 5 A 30 V DC resistive 1 relay outputs 2 A 250 V AC inductive 0.4 20 ms relay outputs 2 A 30 V DC inductive 7 ms relay outputs
discrete input number	3
discrete input type	Logic LI1, LI2, LI3 5 mA 4.3 kOhm
discrete input voltage	24 V <= 30 V
discrete input logic	Positive logic LI1, LI2, LI3 < 5 V and <= 2 mA > 11 V >= 5 mA
output current	0.4...1 Icl adjustable
PTC probe input	750 Ohm
communication port protocol	Modbus
connector type	1 RJ45
communication data link	Serial
physical interface	RS485 multidrop
transmission rate	4800, 9600 or 19200 bps
installed device	31
protection type	Phase failure line Thermal protection starter Thermal protection motor
marking	CE
type of cooling	Forced convection
operating position	Vertical +/- 10 degree
height	265 mm
width	130 mm
depth	169 mm
product weight	7 kg
power range	7...11 kW at 380...440 V 3 phases 4...6 kW at 200...240 V 3 phases
motor starter type	Soft starter